Refrigerator Troubleshooting Diagram

Compressor Replacement

without comments

The reinstallation of a compressor is roughly a reversal of the process of removing it. First, place the mounting pads and washers in position. Place the compressor carefully on the base in the same position it occupied before removal. Bolt the compressor in place. Replace the suction and discharge valves, using new gaskets. After the compressor and valves are bolted in place, the compressor must be evacuated to remove the air.

Written by sam

February 14th, 2011 at 12:02 am

Posted in Compressors

Tagged with

Leave a Reply

You might also likeclose