The compressor motor is a capacitor-type, split-phase motor that has two windings. The starting winding has the capacitor in series with it to give great…
Author: sam
This section lists the procedure and steps necessary to dismantle window air conditioners. The procedure can be used in its entirety or in part, according…
Room-air-conditioner servicing is similar to refrigerator servicing. An air conditioner is a refrigerant system that removes heat from a room. (In a refrigerator, the heat…
The unit control switch may be located on top of the cabinet or on one of the sides, depending upon the particular design. The control…
The thermostat (or temperature control) stops and starts the compressor in response to room temperature requirements. Each thermostat has a charged power element containing either…
It is extremely desirable that a survey of the room is made prior to the actual installation of a console unit. Determine the most favorable…
The console air conditioner is a self-contained unit that can come in 2-hp to 10-hp sizes. These units are used in small commercial buildings, restaurants,…
After the unit is removed from the crate, the mounting frame should be located on the sill of the selected window. The window should be…
Following are the important variables to keep in mind when estimating the Btu requirements for a room cooling installation: Room size in square feet of…
The cooling capacity of an air-conditioning unit is the ability to remove heat from a room and is usually measured in Btu per hour. The…