Water Amount
Indicator Light
Water Amount
NOTE: Do not dismantle the ice storage bin unless it is
necessary.
When removing the CRISPER compartment you will see
the water tank. Do not remove it, you can produce
water leakage. The water tank is not a removable part.
If you need to remove the ice storage bin, do so as follows:
4. ICEMAKER
ICE STORAGE BIN
NOTE: Use both hands to remove the ice bin to avoid
dropping it.
• Hold the ice storage bin as shown in the figure pull it
out while slightly lifting it .
The ice bin stores the ice cubes made by the ice maker.
Tank
Crisper compartment
Check water level
1) Confirm the amount of water supplied to the
icemaker.
(1) Press the button (Figure 1) to select the level of water
(Optimum level ‘Large’
(1) Press the button (Figure 1) for
more than 3 seconds and It will start
the Test mode.
(2) Test the operation of the operating
part of the icemaker. selected level of
water).
(4) The test mode is completed after
the water is supplied.
Note : When using the test mode more
than twice consecutively, water can
overflow.
When the water overflows, wipe the ice storage bin.
* It is acceptable if the adjusted level of water is a bit
smaller than optimum level.
2) Icemaker Operation Test
(Test mode)