
TROUBLESHOOTINGTROUBLESHOOTING
10) If Humidity Sensor has trouble10) If Humidity Sensor has trouble
Bad contact of connector /insert correctlyBad contact of connector /insert correctly
Connector CN30 insertedConnector CN30 inserted
Is Humidity SensorIs Humidity Sensor
Is the voltage betweenIs the voltage between
MAIN PCB Connector CN30-”3”(White-Blue) andMAIN PCB Connector CN30-”3”(White-Blue) and
REG1-GND normal?REG1-GND normal?
Is input voltage ofIs input voltage of
ICO1 MICOM #8 normal?ICO1 MICOM #8 normal?
DATA2. Humidity Sensor TableDATA2. Humidity Sensor Table
Replace the Humidity SensorReplace the Humidity Sensor
Recheck the PCB & Recheck the PCB &
NO (1.0V > Measurement < 3.5V)NO (1.0V > Measurement < 3.5V)
Check the iced-solder, solderCheck the iced-solder, solder
bringing, disturbed solderbringing, disturbed solder
Exchange the PCBExchange the PCB
No trouble with PCB temperature sensor.No trouble with PCB temperature sensor.
Recheck the bad contact ofthe connectionRecheck the bad contact ofthe connection
** Measuring point of resistance value according to** Measuring point of resistance value according to
Humidity : CN30 ”1”Humidity : CN30 ”1”
Resistance value with opened : about 50Resistance value with opened : about 50
: Short trouble /: Short trouble /
: Open trouble: Open trouble
Sensor MICOM/Connector numberSensor MICOM/Connector number
easured between 3easured between 3
Measuring voltage of ICO1 MICOM #8,Measuring voltage of ICO1 MICOM #8,
(White-Blue) and (White-Blue) and
REG1-GND fromREG1-GND from
PCB typical Ground part are similar.PCB typical Ground part are similar.
Check the voltage of Check the voltage of
Resistance, R321Resistance, R321
Checking method ofHumidity Sensor resistanceChecking method ofHumidity Sensor resistance
CN30-"3"(White-Blue)CN30-"3"(White-Blue)
the temperaturthe temperatur
Refer to circuit diagram in Refer to circuit diagram in
Connector CN30-"3"(White-Blue) toConnector CN30-"3"(White-Blue) to
REG1-GND PCB typical GroundREG1-GND PCB typical Ground
Checking method ofHumidity Sensor voltage.Checking method ofHumidity Sensor voltage.
1(IC01 MICOM 1(IC01 MICOM
CN30-"3"(White-BlCN30-"3"(White-Bl
Measuring voltage of Measuring voltage of
CN30-"3"(White-Blue)CN30-"3"(White-Blue)
PCB Typical GroundPCB Typical Ground